Open Joint - Stock Company  "Reduktor"
Main pageMail




 



















Products

Cargo epicyclic hoists and swiveling devices | prev | next | back to the list
Cargo epicyclic fluid-powered hoists such as ЛГ-35
Purpose.
   The cargo hoist epicyclic two-stage ЛГ-35 is intended for applying in pillar jib self -propelled cocks fluid-powered and other lifting machines.

Conditions of reducers applying.
   The cargo hoist is intended for operation in modest and cold (area I2) macro-climatal areas on GOST 16350-80.
Tab.1 Characteristics.
Nominal hauling capacity in cable rope, kH 35,0
Rated speed of reeling off cable rope, m/min 60,0
Barrel diameter (on cavities), mm 363,5
Reduser's reduction ratio 29,88
Cable rope diameter, mm 14,0-16,5
Coiling length , m (3 strata arrangement) 100
Coiling length , m (4 strata arrangement) 130
Hoist mass without the cradle and hydromotor, kg 300
The two-speed hydromotor 303.3.112 (3031.112)
Brake type disk with hydroshut-down
Overall dimensions
without the hydromotor
with the hydromotor

768x530x530
1153x530x530

   The hoist is equipped with a multidisk frictional brake with hydraulic disinhibition, is constructional placed in the body of reduser. Barrel disinhibition takes place at submission in a piston cavity of oil ("ВМГЗ" ТУ 38-101479-79, "ВМЗО" ТУ 381-01-50-79) stress 2,0 МPа. A moment on the source shaft retained by a brake, not less than 346 Нm.

Tab.2 Hydromotor adjustable 303.3.112 GOST 15-150-69 (in exchange ТУ 22-1-020-84-92). Basic parameters.
Nominal frequency of rotating, rev/min 1200
Stress on an input(entrance), МPа
nominal
maximum

20
35
Turning moment nominal, Н*m 332
Nominal cost, litre/min 142
Mass, kg 38
Fig.1 Overall dimensions of a hoist.




 home  |  site map  |  mail    
© 2001 JSC "Reduktor". All rights reserved.

Рекомендуем: